2 mm shim mod for Suzuki 700 King Quad extended video
This guy does a nice step by step video of a shim installation. Make sure that all the parts are very clean before it is reassembled
and clutch cleaning
Duration : 0:5:12
Automotive Radiator Flush Is A Quick Job
With driving every day and a busy lifestyle it is easy to let the little things go a bit to long. When you are in heavy traffic and it is the worst possible time for an automotive problem that is when it is going to happen. There are a few simple automotive repairs that you can do to try to avoid problems.
A radiator flush is a easy job that most everyone can do. A properly maintained cooling system is important. It keeps the engine cool and it also helps the AC cooling system functioning properly.
Before you begin the job make sure that you have everything you will need. The radiator flush solution and proper amount of coolant. The tools you will need are a rag, screwdriver, funnel and a receptacle for catching and storing the used coolant until it can be disposed of at a proper facility.
The first thing you need to be sure of is that the engine has had plenty of time to cool down. The last thing you want is to be burned by hot coolant (very painful). Once the radiator drain or the lower radiator hose has been removed from the radiator the fluid will drain. Take the cap off to speed up the process.
Be sure that the receptacle is positioned to catch all the engine coolant. If the coolant spills over it can be messy and lead to more clean up time. Coolant can be toxic to animals and it has a sweet taste so they will drink it if you let them and it is not good for them. The answer is do not let them drink it.
When the coolant is finished draining replace the plug or the hose which ever you removed. Then add the bottle of radiator flush and fill with water. Put the cap back on the radiator and start the engine. Turn on the heater and let the engine run. The instructions usually call for 5-10 minutes. After the engine has run for the instructed time turn it off and let the engine cool down again.
After the engine is completely cool drain the flush and water into the approved container again. Then fill the engine with the proper amount of coolant for your area. The coolant bottle should tell you what is recommended for your climate. Some severe climates call for a 50/50 mix of water and coolant. Do not use only antifreeze in your cooling system as it is a corrosive.
There are a few easy automotive repairs that you can do yourself. Just remember to always make sure the radiator and engine is completely cool. The excess fluid should always be stored in an approved container and discarded properly.
Free Toolbar Download
Mud boggin in a Chevrolet Astro Van!
For some unGodly reason we decided to take my Chevrolet Astro company work van muddin! Another thing why would they give me a 2wd van? instead of an Awd van lol well Its probably a good thing that they didn’t because I would go muddin in it all the time if they did! lol
Duration : 0:2:32
JAMES & SCOTTY MUDDING BAD TRUCKS 4X4 JEEP
MUDDING
Duration : 0:3:31
Florida Mud Hole ( Part 2 )
More fun at a florida mud hole.
Duration : 0:6:24
Firecracker Mud Boggin Part 3
Staff comes and 2 guys go mud sliding
Duration : 0:2:10
Contact Me
astevn816@yahoo.com
Mudding Trucks
mud bog williamsburg underdog sbc
center seater toyota, sbc 406 injected on alcohol. small fire due to blowing out valve cover gaskets onto hot headers … mud boggin bog sbc 406 fast
Duration : 0:3:20